So, how far can a Bobcat 300 miner reach? Operating at ultra-low power (5W), the Bobcat Miner 300 has a signal range of more than 10 miles, providing connectivity to tens of thousands of LoRaWAN terminal nodes detected within its range.
Please read on for more detailed information.
Table of Contents
Specifications
| Brand | Piecemaster |
| Frequency Band Class | Single-Band |
| Wireless Communication Standard | 802.11g |
| Compatible Devices | Android, iPhone |
| Recommended Uses For Product | Home |
| Connectivity Technology | Wi-Fi |
| Color | Black |
| Antenna Type | Fixed |
| Operating System | Android |
| Security Protocol | WPA2-PSK |
Should You Get One
Even though you don’t make a lot of H and T tokens living in an urban area, there are plenty of hot spots nearby. After all, the Helium network is too passive now that there are so many more miners joining it. You can set it up for $450, leave it there for a year or two, and then remove it. You’ll definitely recoup your initial investments within the first few months, I’m confident. However, if you’re out in the middle of nowhere, very far from any urban or city area, you need to plan carefully because your income will be much lower than what I’ve shown you here.
That might take you for a very long time to earn back the initial investments. Unless you want to upgrade to a higher DBI antenna, like an eight, ten, or twelve depending on where you are. If you go a little further, you might be able to reach some other hot spots that are really far away. Providing you can connect to nearby hotspots. You will then notice a change and an increase in the daily H and T tokens you earn.
Tips for Becoming Part of the Helium Community
I would advise anyone thinking about joining the Helium community and running a hotspot to spend some time learning about the science of RF signals and how it relates to your location in relation to other hotspots nearby. You can always enhance your setup if you have a good location. Your miner will only be useful as a paperweight if you don’t have a good location for it.
Last, How far can a Bobcat 300 miner reach?
Operating at ultra-low power (5W), the Bobcat Miner 300 has a signal range of more than 10 miles, providing connectivity to tens of thousands of LoRaWAN terminal nodes detected within its range.
If you have any questions, please leave a comment. Thank you for reading.
