Bobcat Miner 300 VS MNTD Miner: Which is Better

This guide will demonstrate the differences between the MNTD Miner and the Bobcat Miner 300 in terms of price, performance, and accessories.

A great way to generate a passive income that appreciates over time is by mining the Helium cryptocurrency. The value of the coins you produce from mining will increase as you continue. Choosing a miner that meets your performance and cost-saving requirements will be your first step toward success. In order to help you determine which one is best for you, this post will compare the MNTD Miner and the Bobcat Miner 300.

Bobcat Miner 300

Bobcatminer and their Although Bobcat 300 is undoubtedly the most attractive in terms of appearance, is it the Helium hotspot miner you should purchase? The answer is yes. The Bobcat 300 is available for purchase on their website, but delivery takes 8 to 10 weeks. The enormous LORA manufacturer Easylinkin has a subsidiary company called Bobcatminer. Throughout our journey, we encountered one problem with the Bobcat. They regularly (almost daily) release updates. Due to the delay in synching back to the blockchain, there may be some days when no mining takes place. Even though Bobcat is a trustworthy miner, our average over 30 days was a little lower than usual.

In 2021, the Helium community selected this device as their preferred hotspot. Additionally, it has extremely quick eMMC storage, which enables it to mine HNT efficiently and earn good money. Miners can control Hotspots using the Bobcat app. For mining HNT, the device also supports 5 G.

How to mine HNT using Bobcat Miner:

Step #1: Install the antenna and hanger. It may be hung or simply left on the desktop. Obtain an Internet connection for your computer. On your phone, enable Bluetooth and GPS. Download and install the Helium app from the iOS App Store, Google Play, or another app.

Step 2: Configure the gadget. On the login page of the app, open it and choose Hotspots. You can read the configuration guide or omit it when selecting a miner.

Connect the miner’s power source. Light red will first appear, then yellow. To turn on Bluetooth, insert the pin into the buttonhole and hold the button down.

When the indicator lights up blue as it should, select Scan my Hotspot on the mobile app. Tap on the miner when you find it to set up the network. Use the Ethernet or enter your WiFi password. When connected, the light will change from blue to green.

Features:

• 2GB RAM, quad-core Cortex A35 processor.
• frequency support for EU868, US915, AU915, KR920, and AS923.
• 4 dBi antenna gain, Bluetooth 5.1, and WiFi support.
• OTA upgrades.
• 64GB eMMC 5.1 Flash memory.

Pros:

• Using the Bobber app, manage and control Hotspots.
• 30% global market share for the Bobber network, which offers the Hotspots more ways to make money.
• 5G cellular support in addition to For my HNT, LoRaWan coverage.
• LongFi compatibility.
• Mine through data transfer, beaconing, and witnessing over LoRaWan.
• just 5W of extremely low power consumption.

Cons:

• Pricey mining device.

MNTD Miner

RAK Hotspot is the device’s foundation. It is available in two variations: the Limited Edition Goldspot and the Blackspot miner, which is the standard edition. The former has 8 GB of RAM, while the latter only has 4 GB. VIP support is provided by Goldspot.

You must secure the account when you set it up by writing down the 12-word passphrase and keeping the piece of paper in a secure place.

How to mine HNT with MNTD:

Step #1: Connect the USB-C power cable and antenna to the miner before setting it up.

Step #2: Get the Helium Wallet app now. Open the app, click the plus sign (+) in the top right corner, select the miner brand, find it by scrolling to the Rack Hotspot, swipe to the last card, and acknowledge that you have read the user manual. Tap “I’m powered up” after confirming that you understand.’

Enable Bluetooth on the phone, then tap Scan for my Hotspot to see if Bluetooth can locate the Rak Hotspot. It will display as a Helium Hotspot. Click on it and wait.

Step #3: Connect the miner’s WiFi or Ethernet to the Internet.

Step #4: Configure the Hotspot location. The $10 cost is covered for a new device when paid with HNT tokens. Use the available antenna or the standard 2.8 dBi. Verify the antenna and location on the confirmation page.

If you encounter a problem, re-add the miner.

Place a static IP address aside for the miner and forward ports on your WiFi router by clicking Go to Wallet. In the event that you fail to do so, the status will change after you set it up to Relayed, which may have an impact on mining profits.

Features:

• Raspberry Pi 4.
• 4/8 GB RAM.
• Support for CN470 frequency is provided by RU864, IN865, EU868, US915, AU915, KR920, AS923, and US915.
• Support for WiFi at 2.4 and 5 GHz, Bluetooth 5.0.
• 5.8 dBi antenna capability.
• In-built heat sink.
• 32 GB SD card storage.
• a manual for installation.

Pros:

• Update to a 5.8 dBi antenna if you want to make more money.
• Two RAM options.

Cons:

• Pricey.
• Complicated setup.

The Difference Between Bobcat Miner 300 and MNTD Miner

HNTs can only be mined using approved equipment. The Helium website includes a list of all the manufacturers who have consented to support the Helium Blockchain. The table clearly illustrates the differences between the MNTD Miner and the Bobcat Miner 300 in terms of price, performance, and accessories.

What Kind of Antenna Be Used Will Be More Profitable?

The frequency that your Helium network operates at should be taken into consideration when selecting an antenna. The determining element in this case is geography. For instance, the Helium network operates in the 915 MHz unlicensed ISM band if you live in the United States of America or Canada. For instance, if you are in the United Kingdom, you can access the web on the 869 MHz spectrum.

As a result, depending on where your hotspots are, the antenna you select needs to be able to cover the appropriate band for connection.

Different antennas cover both the 869 MHz spectrum and the 915 MHz band. Tracing an antenna that operates in the 470 MHz, 869 MHz, and 915 MHz bands, on the other hand, can be challenging.

Selecting a miner with multiple band antennas enables you to use it more frequently and generate more revenue. In any case, even if you decide against using it for mining anymore, this will make selling it simpler.

Decibels per isotropic, or dBi, are used to measure the forward gain of antennas used in devices like Helium Hotspot Miners. An increase in dBi will have an impact on the transmitting antenna’s beam width. A higher dBi value will result in a narrower range as the outgoing signal grows.

However, just because an antenna has a higher dBi value doesn’t automatically make it better. 3-6.5 dBi antennas are more advantageous for helium hotspot miners in populated areas with numerous natural and man-made obstructions, such as trees or buildings. The likelihood of a narrow beam being bounced off of these obstructions will be reduced because the transmitted beam will travel more vertically.

Longer omnidirectional antennas are typical of higher gain omnidirectional antennas. This is because the higher gain is produced by phasing and stacking a large number of small antennas, lengthening both the stack and the antenna.

Because the different small antennas are “phased” together, their gains add up, giving the stacked array a higher total gain. Under the same circumstances, miners with a higher antenna gain have a higher gain.

Greater LoraWAAN network coverage is correlated with higher transmit power. Notably, TX power must adhere to Helium’s official certification requirements. Otherwise, miners won’t be able to obtain FCC certification.

Summary: Bobcat Miner 300 Vs MNTD Miner

The 32% market share of Bobcat is beneficial for miners because it offers extensive node coverage, ensuring you do not miss as many HNT mining opportunities as a Challenger, Transmitter, and Witness. In comparison to other devices, the Bobcat device also controls a 4 dBi antenna gain, which ensures more HNT is mined.

Low-voltage miners such as those used to extract helium typically use 5W of power. Any HNT miner will work well with 2 GB RAM, but the 8 GB RAM option offered by MNTD Miner makes it the clear winner.

Bobcat’s 64 GB SD card would be the best choice for storage because it makes the devices quick enough to earn HNT cryptocurrency.

Please post a comment if you have any queries.

I appreciate your reading.